Fluid Components International ST100 Series Configuration Software - Manual (Page 10)

ST100 Series Configuration Software
6 Fluid Components International LLC
Advanced Setup Tab Screens
Select the Advanced Setup branch on the menu tree. The Advanced Setup branch, User Parameters Tab is shown below. A horizontal Tab
structure across the top of the screen is used when any of the main branch menus are selected.
User Parameters
The Advanced Setup branch offers 5 Tab selections
Tab Name Tab Description Password Level
User Parameters Shows Min/Max process variable limits, K Factor, Density, Damping User
Factory Parameters Shows Calibrated Min/Max process variable values Factory
Identification Software Version, Serial no. Factory
Ethernet Ethernet and Instrument MAC Address values User/ Factory - MAC
Date and Time Set Clock Date and Time User
[User password 2772]
To verify the current configuration of any setup parameter, select the Get From Device button on any of the Setup menus. After changing any of the
setup parameters, select the Send To Device button. Verify the parameter change has been accepted by the instrument by selecting the Get From
Device once button again. The new parameters that were change should now be displayed. The Configuration Tab screens are shown below.