Grace Digital GDI-SW2USB Soundwriter - Manual (Page 11)

The Audacity window and controls will appear:
Press RECORD button to begin recording
Audacity
Press STOP button at the end of
recording to be saved or to begin a new track
Press PAUSE button to pause the
recording and begin again within the same track
STEP 7 Use the lift lever to raise and move the tone arm toward the edge of the
record to start the album platter spinning.
STEP 8 Lower the Stylus (needle) onto the section ahead of where you wish to
begin to record on your album and press Record on the Audacity program
STEP 9 Press the RECORD button to begin recording to your computer using
Audacity
STEP 10 Press the STOP button at the end of your recording to be saved or to
begin a new track. The recording will end when STOP is pressed
STEP 11 Press the PLAY button to listen and review the recording.
NOTE: REMOVE the USB cord from your computer’s USB port before playing
back music recorded to your PC. IF not removed, a USB connection may
interfere with play back and audio may NOT be heard.
STEP 12 Save the recorded file by exporting to your PC in an audio WAV format.
To do this, when the recorded file is open in Audacity, select File from the
menu bar at the top of the Audacity window, Then select Export As WAV…
and a Save WAV (Microsoft) File As window opens
STEP 13 In the open window, enter a name for the recorded file in the File name
section of the window and designate where to save the file on your
computer in the section at the top of the window. The Desktop is most
preferred location to save recorded files for the first time.
NOTE: Once you have saved your recorded files in WAV format to your PC you
can keep the files on your computer for future use and move the files to
Windows Media Player or iTunes.
.
9
to your computer using
your
Press PLAY button to listen and review
recording