Grace Digital GDI-IRBM20 Business Music System - Manual (Page 21)

-
20 -
Set Time
< Set Alarm >
5. Press the ‘Select’ button.
Disable all
1 OFF
2 OFF
3 OFF
4 OFF
5 OFF
6. Turn the knob to choose between <Disable all> which turns off all alarms or any of the 5 alarms. Press the select button to set the alarm that
you want to activate. Below is an example to set Alarm 1. Choose < 1 Off 12:00 AM>
< 1 Off 12:00 AM >
7. If you choose “Yes” then the display enables you to set the time for the alarm.
Set Alarm
15:06
8. After selecting < 1 Off 12:00 AM> you can choose the time to set the Alarm.
Set Alarm
12:00 AM
9. Turn the knob until the minute setting is correct, then press the ‘Select’ button.
Alarm Set:
07:45
10. Turn knob to choose how often you want the Alarm to alarm
11. Turn knob to use either the buzzer or the current radio station that is playing to turn on.
The display shows <Alarm Set> with the time of the alarm shown beneath for 3 seconds and then returns to the radio station display.
When in Standby Mode, the Alarm time is shown next to the clock time with brackets.
1:58