Grace Digital GDI-IRBM20 Business Music System - Manual (Page 30)

-
29 -
5. From the ‘Media Sharing’ window, the radio will be listed as an unknown device. Click on the unknown device listed, then click the ‘Allow’
button and then click ‘OK’.
Allowing your GDI-IRBM20 to connect:
Locating and playing media files using the radio and UPnP
1. Once the UPnP server is configured to share media files with the Internet radio, you can play the files by doing the following on the radio.
2. Keep pressing BACK to get to the radio’s top-level menu and then turn the knob to select ‘Media Player’.
3. Press SELECT and then turn the knob to highlight ‘UPnP Servers’.
4. Press SELECT and the radio will scan for all available UPnP servers. Note, this may take a few seconds for the radio to complete its scan and
before the scan has completed, the radio will display ‘*Empty+’. The radio will continue to display ‘*Empty+’ if no UPnP servers are found.
5. After a successful scan, select your UPnP server, by rotating the knob if there is more than one UPnP server, and then press SELECT.
6. The radio will now list the media categories available from the UPnP server, e.g. ‘Music’, ‘Playlists’ etc. Turn the knob to select which
category you wish to browse, press SELECT and turn the knob to highlight a sub category and press SELECT again. For example, you could
select ‘Music’ and then ‘Album’.
7. Turn the knob to highlight the media files that you wish to play and press SELECT.
8. The radio will display ‘*Add to Queue+’, press SELECT and the radio will add the tracks to its queue and begin playing them automatically.