Arcam Manuel Tuner radio T32 - Manual (Page 16)

e-14
remote
control
SUBT AUDIO TITLE SETUP
INFO STORE P/TUNE FM MONO
TREBLE DIRECT
BAL PROC
BASS
CH
MENU
DISP
MODE
BAND
TUN
AV
DVD
SAT
CD PVR AMP AUX
3 1 2
6 5 4
7 8 9
0 MACRO
SHIFT PHONO RPT
SHUFF
SRCH
SP2
SP1
TV
ÊÊÊÊAV
CR90
The cR90 universal remote
controller
The CR90 is a sophisticated ‘universal’ remote control
that can control up to eight devices. It’s pre-programmed
for use with the T32 and many other Arcam products
(amplifers, CD-players and DVD-players).
With its extensive built-in library of codes, it can also be
used with thousands of other audio-visual components
– TVs, satellite and set-top boxes, PVRs and third-party
CD players. See the final section of the CR90 Handbook
for a list of these.
The CR90 is a ‘learning’ remote, so you can teach it
almost any function from an old single-device remote.
You can also program the CR90 to issue a sequence of
commands (‘macros’) from a single button press – see
the CR90 Handbook for details.
Source keys
As the CR90 can control your T32 as well as a range of
other equipment, many of the buttons have more than
one function depending on the ‘device mode’ or ‘page’
selected.
The device selection keys:
dVd , saT , aV (TV), Tun , aMp
aux , pVR and cd , both select the source and configure
the CR90 to control the particular source.
In other words, the buttons are often ‘context sensitive’
so you’ll have to tell it what sort of device you wish
to control (press the aV button for a video display, for
example) before you can control it.
Select the source key first
Remember to select a source key before pressing
command buttons – commands vary depending on the
source selected!
To control the T32 tuner, press
Tun .
TUN DVD
AMP AUX PVR CD
AV SAT
dVd DVD player
saT Satellite set-top box
aV Audio-visual sound input (use with TV)
Tun DAB, FM or AM tuner, such as the T32
aMp Controls the features of a compatible
amplifier, such as Arcam’s A38
aux Auxiliary input, or an iPod via an rDock
or rLead
pVR Personal Video Recorder
cd Compact Disc player
inserting batteries into the remote control
1. Open the battery compartment by pressing
the button on the back of the handset.
2. Insert four ‘AAA’ batteries into the battery
compartment – one pair facing the top of the unit,
and one pair facing the end, as in the diagram.
3. Lower the end cap onto the plastic locating plate
in the handset. This acts as a hinge, and you
can now push the end cap firmly into its locked
position with a click.