Hydrotech PURA Max and Max Plus Point-of-Use Cooler 1240 Reverse Osmosis Unit Installation Manual - Manual (Page 3)

3
Installation of Quick Connect Pentek Cartridges in the PURA
Max and Max Plus Point-of-Use Cooler
Please verify that all the required items have been received.
The quick connect Pentek Cartridge kit includes the following items.
1. Head, Cartridge, Quick Connect (1) Part # 244426
2. Cartridge, Sediment (1) Part # 25568843
3. Carbon Cartridge c/w Head (1) Part # 158682
4. Tubing, 1/4”,white (10 FT) Part # 115200
Quick Connect Pentek Cartridge Installation Instructions
1. Open the lower door of the cooler as shown in figure 5 below.
2. Insert the ¼” inlet white water tubing inside the cooler through the grommets.
Figure 5
Figure 6
Labeled
“From
Filtration”
¼” Feed
Line Empty
(right port)
Leak
Detector
Labeled “To
Filters”
¼” New
Feed Line