CAME RBM21 - Manual (Page 2)

[ 2
]
ENGLISH
1.0
1.3 1.2
1.1
-
1 2 O
N
3 4
1 2 O
N
3 4
1 2 O
N
3 4
1 2 O
N
3 4
CONTENTS
- Power supply: 230V ac
- Absorption: 230V = 50 mA
- Relay outputs: 3
- Traffic light output: 1
- RS 232 port for PC connection (5 m
max distance)
- RS 485 port for PC connection (max.
1000 m distance, with PC40 interface)
- Extractable-connection terminal boards
- Number of Cards that can be saved: 500
proximity Cards and/or strip (magnetic)
Cards
- Programming: with Master Card or
Password in stand-alone mode; via
software in on-line mode
If there are
memory
allocations already
assigned, a hyphen will appear on the
left display screen.
It also indicates the Stand-By position.
When powering
the RBM21, if the
memory is
completely empty,
all the central segments of the display
will come on.
Display messages
It is a proximity sensor incorporated in the
board.
It emulates reader 4 and it saves Cards
(only proximity cards) directly on the
board in case the readers are far away.
Activate it (and disactivate it when saving
is over) with the selection strip, see pg. 3.
Technical Specifications
On-Board sensor
Technical Specifications § 1.0 - pg. 2
Display messages § 1.1 - pg. 2
Dip-Switch functions § 1.2 - pg. 2
On-board sensor § 1.3 - pg. 2
Connections § 1.4 - pg. 3
Saving the 1 st Card (Master Card) § 2.0 - pg. 4
Saving of Cards § 2.1 - pg. 5
Creation of 2 nd Master Card § 2.2 - pg. 6
Deletion of Cards § 2.3 - pg. 6
Changing the Password § 2.4 - pg. 7
TOTAL deletion of Cards § 2.5 - pg. 7
Using the Password to save Cards § 2.6 - pg. 8
Using the Password with the other procedures § 2.7 - pg. 8
Data saving § 2.8 - pg. 9
Data restoration § 2.9 - pg. 9
Management through coils and diversified unloading § 3.0 - pg. 10
Software Installation § 3.1 - pg. 11
DIP 1 ON
Management of the
semaphore through coil
DIP 2 ON
diversified unloading
DIP 3 ON
relay 1 stepper function
DIP 3 OF
relay 1
monostable
DIP 4 No Function
Dip-Switch functions