Saving the 1st card (master card) – CAME RBM21 User Manual
Page 4
[
4
]
ENGLISH
2.0
ENTER
CH1
CH2
TEMP
RS
23
2
1 2
O
N
R
S
485
MEMORY
RO
LL
CA
M E
Gn
d
AB
PROXIMITY CARD
S4-IN
Card 01
MASTER
MA
STE
R
ENTER
ENTER
1
CH1
2
A
B
C
D
Rbm21 always assigns the first Card saved the role of Master Card, with which it is
possible to carry out all subsequent operations described here. It is therefore necessary to
keep it safe because, along with the Memory Roll card, it is essential in order to make any
Card programme changes or resets.
In this sequence, as in all subsequent sequences, if more than 10 seconds lapse between one operation
and the next, Rbm21 returns to the Stand By position and it is necessary to recommence the
procedure from the start.
Rbm21 assigns relay 1 as default; the number 3 indicates the activation of both relays, not
the traffic light relay.
The saving of the Card is also always signaled by the flashing of the green and red LED indicators on
the front panel of the sensor.
Saving the 1st Card (Master Card)
Press ENTER again
F - 1 1 flashes
Bring the Master Card
close to the sensor for
2 seconds
The Stand By symbol appears
to indicate that the Master Card
is being saved
Press ENTER
SEQUENCE
OF
THE
OPERATIONS
INDICATIONS
ON
THE
DISPLAY
SCREEN
Display F - 1
To change the relay to be con-
trolled, click CH1 once or
twice, otherwise move on to
the next operation
Change the relay asso-
ciated to the Master Card
1
2
3
3