American Audio UCD-100 - Manual (Page 12)

© American Audio ® - www.americanaudio.com - UCD-100 Instruction Manual Page 12
fuNCTiONS aND CONTrOLS - rEMOTE
39. SOURCE SELECTOR - Press this button to select your desired playback source. Select either
CD Player, USB 1, or USB 2. the source indicator LED will light when the selected source is activate.
You can also use this button to record a demo from the current playing track.
40. IN, OUT, & RELOOP -
IN BUTTON - “CUE On tHE fLY” - this function allows you to set a CUE POInt (see CUE POInt
page 17) without music interruption (“on the fly”). this button also sets the starting point of a loop
(see LOOP).
OUT BUTTON - this button is used to set the ending point of a loop. A loop is started by pressing
the In BUttOn,
pressing the OUt BUttOn set the loop ending point. the loop will continue to play
until the OUt BUttOn is pressed once again.
RELOOP BUTTON - If a LOOP has been made (see setting a LOOP on page 21), but the CD Player
is not actively in LOOP mode (a loop is not playing), pressing the RELOOP BUttOn will instantly
reactivate the LOOP mode. to exit the loop, press the LOOP OUt BUttOn.
41. PLAY/PAUSE BUTTON - Each press of the PLAY/PAUSE Button causes the operation to change
from play to pause or from pause to play. While in play mode the green play button LED will glow, and
while in pause mode the green play LED will flash.
42. STOP BUTTON - this button is used to stop playback.
43. PITCH PERCENTAGE & PITCH BEND BUTTONS -
(-) PITCH BEND - the (-) pitch bend function creates a momentary “Slow Down” in the pitch
speed (Beats per minute - BPM) when the PitCh (10) function is activated.
0% BUTTON - this button is used to change the pitch percentage to 0%.
(+) PITCH BEND - the (+) pitch bend function creates a momentary “BUMP” in the pitch speed
(Beats per minute - BPM) when the PitCh (10) function is activated.
39
48
49
50
51
52
44
43
41
40
47
46
42
45
the Max. Range of the remote is 20ft. the beam can be affected by the angle, always aim the re-
mote directly to the IR receiver.