Data port, Reset button, Data port -7 – Clear-Com AES-6 User Manual
Page 13: Reset button -7, Figure 1-3, Figure 1-4
Advertising
Vitec Group Communications
AES-6 Digital Interface Instruction Manual
1 - 7
Figure 1-3: AES-6 DIP Switch Settings for Clear-Com Panels
Figure 1-4: AES-6 DIP Switch Settings for Third Party Equipment
DATA PORT
The data port is a 3.5mm jack socket allowing the AES-6 to be
connected to a PC for software/diagnostics download. To connect to a
PC a PD4007 download cable is required.
RESET BUTTON
The reset button is behind a hole in the front panel to prevent it being
accidentally pressed. To press the reset button insert a narrow rod or
stiff piece of wire such as a paper clip through the hole to press the
reset button.
Advertising