Clear-Com Production-Maestro-Pro - Manual (Page 46)

Clear-Com
Eclipse Production Maestro V5.2 User Manual
1 - 3 6
Figure 1-43: Fixed 4-Wire Viewers on Palette
To add an audio meter to a fixed 4-Wire:
1. Select Configure Canvas mode.
2. Add the desired fixed 4-wire to the canvas by selecting the "4-wires"
tab and dragging to the required 4-Wire to the canvas.
3. Select the "Other" tab to show the Meter control
4. To add an Input Meter, drag the Meter control to the left-hand-side of
the fixed 4-wire on the canvas. The meter will appear to the left of
the 4-wire.
5. To add an Output meter, drag the Meter control to the
right-hand-side of the fixed 4-wire on the canvas. The meter will
appear to the right of the 4-wire.
Figure 1-44: Fixed 4-Wire with Meters
To remove a meter from a Fixed 4-Wire:
1. Select ‘Canvas’ mode.
2. Select the meter to be removed.
3. Drag the meter away from the fixed 4-Wire and drop it onto the
canvas.