Clear-Com Production-Maestro-Pro - Manual (Page 67)

Clear-Com
Eclipse Production Maestro V5.2 User Manual 2 - 9
STARTING THE PRODUCTION MAESTRO
APPLICATION
Production Maestro is now installed on the computer.
• If the firewall configuration is successful, “Updated XP Firewall”
appears in the dialog box.
• If the firewall configuration is not successful a message will be
displayed in the dialog box referring the user to more information.
• Windows XP may show a Firewall dialogue box asking whether to
Block or Unblock Production Maestro. Select Unblock Production
Maestro.
In order to use Production Maestro the ECS configurations should be
exported from ‘Export Project’ as .ccn files which can be read by
Production Maestro.
Production Maestro can save palette and canvas screen layouts
configurations as files with the default filename extension or .ccr . This
filename extension can be associated with Production Maestro so that
clicking on a .ccr file will automatically start Production Maestro and
load the file.
COMMAND LINE OPTIONS
The installer will create entries in the programs menu and optionally
these can be copied to the desktop. The Production Maestro
command line can include parameters to specify configuration and
layout files to be opened on startup and program configuration options.
The Production Maestro configuration options are:
/SIM - runs Production Maestro in simulation mode. An entry to run
Production Maestro in simulation mode is automatically created by the
installer in the programs menu. By default Production Maestro in
simulation mode is emulates a system with a PRO license.
/STANDARD - this option may be added to the /SIM option to force
simulation mode to emulate a system with a non-PRO license.
/ADMIN - runs Production Maestro in administrator mode (only valid in
Pro mode). This makes some additional settings available that allow a
system administrator to place restrictions on user actions. These
settings are saved in the layout file. If a layout file has not been saved
in administrator mode no user restrictions will be saved.
/LAN2 - uses the Lan2 IP address’s to connect to the Linked Set.
/ASSOCIATED-PANEL - this option allows the system administrator to
set up a command line that will specify the associated panel to be
used. The format of the command line is:
/ASSOCIATED-PANEL=PORT.<system number>.<port number>