Clear-Com ICS-1016E - Manual (Page 21)

Clear-Com Communication Systems
ICS 1008E/1016E Intercom Panel Instruction Manual 2 - 5
Speaker Mute (see “Speaker Mute Level Control” on page 2-4) is set to
maximum. In this case, it will be necessary to turn the panel
microphone gain down. Similarly, in some noisy environments it may
be necessary to turn the panel microphone gain down and have the
operator talk more closely into the microphone.
EXP-1016E
The expansion panel does not have any adjustment controls.
CONFIGURATION
ICS-1016E/ICS-1008E
Assign each panel’s name and other parameters by using the Eclipse
Configuration System (ECS) program (see the ECS manual for more
information).
EXP-1016E
After mounting the key panels and connecting them to a panel, the
number of accessory keys installed in the panel must be programmed
into the configuration program as follows:
1. Enter the Setup - Hardware and Labels screen.
2. Find the appropriate panel in the Port Function column and select it.
3. Click on the drop-down menu in the XP/AP Keys column and select
32/0.
4. Click Apply.
Note: An ICS-1008E or 1016E panel can only have one EXP-1016E
expansion panel connected to it.