Clear-Com Logic-Maestro - Manual (Page 43)

Clear-Com Communication Systems
Eclipse Logic Maestro Instruction Manual 1 - 2 9
Crosspoint Trigger Examples
Examples of the use of crosspoint triggers and actions are shown
below.
Figure 1-54: Crosspoint Trigger for Crosspoint Action
In example Figure 1-54 when source ‘P1’ establishes an audio path to
destination ‘P3’ the crosspoint trigger will be activated to provide an
input to the crosspoint action. The crosspoint action will enable
crosspoints between the same source ‘P1’ and two other destinations
‘P6’ and ‘P7’ at priority 4.
The effect would be that whenever the panel operator ‘P1’ talks to ‘P3’
the audio will also be routed to ‘P6’ and ‘P7’.
Examples of crosspoint triggers used to trigger control outputs are
shown in Figure 1-55.