Clear-Com Logic-Maestro - Manual (Page 47)

Clear-Com Communication Systems
Eclipse Logic Maestro Instruction Manual 1 - 3 3
Figure 1-59: Crosspoint Actions List
The available crosspoint actions are:
• Enable Action - enable all the crosspoints between the sources
and destinations that satisfy the crosspoint type and priority
criteria except where sources or destinations are marked as
excluded.
• Inhibit Action - inhibit all the crosspoints between the sources and
destinations that satisfy the crosspoint type and priority criteria
except where sources or destinations are marked as excluded.
• Isolate Action - isolate all the crosspoints between the sources
and destinations that satisfy the crosspoint type and priority
criteria except where sources or destinations are marked as
excluded. When isolate actions are applied to bidirectional
crosspoints it will only isolate the source to destination part of the
audio path, not the destination to source part.
Crosspoint Type
Open the crosspoint action menu and right click on the current
crosspoint type to display the menu of crosspoint types.
Figure 1-60: Crosspoint Type List
The crosspoint action can be set to operate when either source to
destination crosspoints are made or bidirectional crosspoints are made
between any of the sources and destinations configured. Right click
on the menu item to select the crosspoint type.