Hach-Lange SI794 D User Manual - Manual (Page 45)

OFF
(ON)
Code Display Action Choices
o2.
Output signal during HOLD
LAST: During HOLD the last
measured value is maintained at
the output
FIX: During HOLD a value (to be
entered) is maintained at the
output
Select using key.
Press enter to proceed.
LAST
(FIX)
Only with FIX selected:
Enter current which is to flow at
the output during HOLD.
Select position using key and
edit number using key.
Press enter to proceed.
21.0 mA
(00.0 ...
21.0 mA)
Output signal during HOLD:
Output current
[mA]
Output signal for HOLD
Setting FIX = 21.0 mA
HOLD active
21
4
Output signal for HOLD
LAST setting
HOLD active
22 mA signal for error message
Select using key.
Press enter to proceed.
45