Hach-Lange DR 3800 Additional Software LINK2SC - Manual (Page 15)

3
Section 1 General Information
1.1 Safety information
Please read this entire manual before installing the software. Refer
to the DR 3800 user manual for more information about the
spectrophotometer.
1.2 General product information
LINK2SC ® is a software for comparing process and laboratory
measurements directly in the DR 3800 spectrophotometer.
The detailed color diagram displays the measured values of a
representative lab sample and the corresponding measured values
of an sc1000 controller.
The sc1000 controller saves measured values from all sc sensors
on an SD SanDisk card (see
Section 4 on page 22 ).