Hach-Lange DR 2800 eco - Manual (Page 92)

90
Advanced Operations
Concentration Factor:
1. Press Concentration Factor: Off in the ”Options“ menu. Press
On to activate this feature.
2. Press the ”Factor“ key and use the alphanumeric keypad to
enter the factor by which absorbance readings are to be
multiplied. Press the ”Unit“ key to select the units for
concentration measurements or to create a new unit.
3. Confirm with OK.
Concentration Resolution:
1. Press Concentration Resolution in the ”Options“ menu.
2. Make your selection and confirm with OK.
Concentration
Resolution
To select the position of the decimal point in the calculated concentration readings.
Save as User Program
To store the selected parameters as a User Program, see 6.1 User Programs (DR 2800 only) on
page 65
Recall Data
Call up saved measurement data or time courses, see 5.3 Storing, Recalling, Sending and
Deleting Data on page 38 .
Instrument Setup Basic data of the instrument, see 5.2 Instrument Setup Mode on page 29 .
Table 12 ”Single Wavelength“ options (continued)
Figure 14 Options
Options Description