INSTEON DIN Rail Dimmer - 2452-222 (US), 2452-422 (EU), 2452-522 (AUS/NZ) Manual - Manual (Page 12)

Page 12 of 19 2452-222/2452-422/2452-522 - Rev: 1/21/2014 7:50 AM
Specifications
General
Product name DIN Rail Dimmer
Brand/manufacturer INSTEON
Manufacturer product number
US 2452-222
EU 2452-422
AUS/NZ 2452-522
UPC
US 813922012798
EU 813922012804
AUS/NZ 813922012811
Warranty 2 years, limited
INSTEON
INSTEON powerline mesh repeater Yes
INSTEON RF mesh repeater Yes
INSTEON controller Yes
INSTEON responder Yes
Maximum links/scenes 400
Load brightness levels 32 locally (256 with software)
LED
Green when load is on, red when load is off.
Blinks red when responder does not acknowledge (can be disabled via
software).
Blinks red or green during setup.
LED brightness Adjustable, from off to bright
Local on-level Adjustable, 32 fixed brightness levels or resume dim
Local ramp-rate
Adjustable from 0.1 seconds to 5 seconds locally (0.1 seconds to 8
minutes via software)
Local control Yes
Commands supported as controller On/off, Fast on/off, Begin brighten/dim, End brighten/dim
Commands supported as responder On/off, Fast on/off, Beep
Software configurable Yes
RF range
Up to 150 feet (50 meters) open air*
*Range may vary due to local interference
Phase bridge detect beacon Yes
INSTEON device category 0x01 dimmable lighting control (all frequencies)
INSTEON device subcategory
US 0x34
EU 0x36
AUS/NZ 0x37
X10
X10 address 1 optional (comes unassigned)