INTELLINET NETWORK NSC11-WN User Manual - Manual (Page 42)

42
camera uses.
CBR: Set the maximum bit rate the camera must not
exceed. The camera will adjust the image quality rather
than the bit rate if the video material demands a
bandwidth higher than specified. The higher the value,
the better the quality of the resulting video.
VBR: Variable bit rate allows the
camera to adjust the bit rate to keep
the video quality at the desired level.
You can choose from five different
values.
Video Frame
Rate Specify video refresh rate of MPEG4 video
encoder. Higher video refresh rates provide a
smoother video, but require more network
bandwidth.
2.4.3 MJPEG
The Motion-JPEG video settings are configured in this section. The parameters
are essentially identical to those of MPEG4, with the exception of the video quality.
You can only select the variable bit rate mode and choose from five available
options.
Click “Apply” to save the settings.