IQinVision Alliance-pro Series - Manual (Page 13)

13
13 PC Configuration of IQeye Alliance-pro
PLEASE NOTE – The default user name for all IQeye devices is “root” and the default password is “system”.
IQeye cameras are configured for DHCP and will have an IP addressed assigned
if a DHCP server is on the network. If a DHCP server is not available, the camera
IP address will need to be configured using either IQfinder or IQmanager
depending on the number of cameras being installed.
a. Insert the IQtools CD in the CD drive of the PC. The IQfinder installation
application will launch automatically.
b. Click “Scan for IQeye cameras on my network” to find IQeye cameras
(Figure 13.1). The detected cameras will be displayed in the IQfinder window.
Highlight a camera from the list and click the “Assign IP” button to edit the
selected camera’s IP settings.
Figure 13.1