IQinVision Alliance-pro Series - Manual (Page 14)

14
c. The “Assign IP” window allows the IP Address, Subnet, and Gateway of the
camera to be changed. It also allows the camera to be configured to DHCP.
Click the “Apply” button after making the desired changes (Figure 13.2).
NOTE: Changing between a static IP address and DHCP will cause the camera to reboot.
d. To view a camera, double click a camera entry or highlight a camera in the
list and click the “Web Page” button (Figure 13.3).
The “Live” page will be displayed through the default browser (IE
recommended). It is also possible to open Internet Explorer and enter
the IP address of the IQeye camera in the address field of the browser. If
prompted, install the Active X control (Figure 13.4).
Figure 13.2
Figure 13.3
Figure 13.4