Installation, Unpacking – AEG LAVAMAT 62895 User Manual

Page 40

Advertising
background image

Installation

Unpacking

All transit bolts and packing must be
removed before using the appliance.

After removing all the packaging, carefully
lay machine on it’s back to remove the poly-
styrene base from the bottom.

Remove the pow-
er supply cable
and the draining
hose from the
hose holders on
the rear of the
appliance.

With a suitable
spanner, supplied
with the machine
unscrew and
remove the central
rear bolt A. Slide
out the relevant
plastic spacer.

Unscrew and
remove the two
large rear bolts B
and the six smaller bolts C.

Remove the bracket D. Tighten up the six
smaller bolts C.

82

HEC0008

HEC0002S

A

HEC0001

HEC0011S

D

C

C

B

HEC0003S

B

C

C

HEC0014

132974550_gb.qxd 01/02/2007 13.38 Pagina 82

Advertising
This manual is related to the following products: