KT&C KPC-HLND45 - Manual (Page 15)

8. OSD MANUAL
4-2. DAY&NIGHT (Standard Type)
Conversion of output image to COLOR / BW depending on exterior environment.
- D&N MODE
1. COLOR: Enables user to set the image to color mode.
2. B/W: Enables user to set the image to B/W mode.
3 AUTO: Enables user to convert to COLOR/BW
automatically by photocell
- DWELL TIME: In D&N MODE AUTO, enables user to set a
delay when for changing COLOR/BW(0~10sec).
- AGC THRS: The threshold AGC value for switching from
Day to Night. In D&N MODE AUTO, enables user to
set AGC THRESHOLD level (0~20steps).
- MARGIN: To switch from Day to Night margins.
In D&N MODE AUTO, enables user to set to MARGIN level (0~20steps)
- INITIAL: Enables user to reset the DAY&NIGHT menu.
5. IMAGE
- SHARPNESS: Enables user to control the image sharpness. (0~10steps).
- FLIP: Sets the Vertical and Horizontal flip for the display output.
- DZOOM(Digital Zoom): Max. 20x Digital Zoom.
- HLMASK: This function improves the visual recognition
of license plates and other such objects by suppressing or masking strong light sources.
1. HLMASK LEVEL: Enables user to set HLMASK Level (0~20steps).
2. HLMASK COLOR: Set the HLMASK color (Black, White, Yellow, Cyan, Green, Magenta, Red, Blue).
- D-WDR: In this mode, the brightness of a single image is compensated using the gamma curve.
- DNR: This function reduces noise.
- DEFOG: Visibility Enhancement for low contrast. Conditions Use this function in foggy weather.
- INITIAL: Enables user to reset the IMAGE menu.
15
IMAGE
> SHARPNESS
FLIP
DZOOM
HLMASK
D-WDR
DNR
DEFOG
INITIAL
RETURN
| ||||| | |||| | 8
OFF
1.0X
OFF
OFF
MIDDLE
OFF
(OFF) (H-FLIP) (V-FLIP) (HV-FLIP)
(Outline of DNR function)
DAY&NIGHT
> MODE
DWELL TIME
AGC THRS
MARGIN
INITIAL
RETURN
AUTO
3s
|
|||||
|
||||
| 10
| ||||| | |||| | 10