KT&C KPC-HLND45 - Manual (Page 17)

8. OSD MANUAL
- MOTION: Motion detection function.
1. RESOLUTION: Enables user to set resolution
2. SENSITIVITY: Enables user to set sensitivity.
3. WINDOW USE: Enables user to turn motion detection ON/OFF
for the selected window.
4. WINDOW TONE: Enables user to choose how to display the
motion detection window.
5. X-POSITION : Window Horizontal start position.
6. Y-POSITION : Window Vertical start position.
7. X-SIZE : Window Horizontal width.
8. Y-SIZE : Window Vertical height.
9. INITIAL : Enables user to reset the MOTION DETECT.
- DISPLAY : Enables user to set up a screen output for
CAM TITLE, MOTION, DZOOM.
1. CAM TITLE: Enables user to display the fixed
CAM TITLE on the screen.
2. MOTION: Enables user to display the word Motion
on the screen when the motion detection function.
3. DZOOM: Enables user to display the DZOOM ratio
on the screen.
4. INITIAL: Enables user to initialize of DISPLAY menu.
-
SYSTEM
1. DEFECT DET: White pixel detection and
compensation function.
2. DOUT FORMAT: Enables user to set
digital output format (720p, 1080p).
3. DOUT FPS: Enables user to set
digital output frame rate.
4.FREQ: Enables user to set
power-frequency(50Hz, 60Hz).
5. CVBS: Enables user to set CVBS type (NTSC or PAL).
6. APPLY: Enable user to apply the SYSTEM settings.
7. FACTORY DEFAULT
: Enables user to reset all of the settings to the factory default.
8. EXIT
: Exits the OSD menu after saving the camera settings.
HOT KEY
To quickly switch CVBS type(NTSC or PAL), Push LEFT KEY or RIGHT KEY more than 2seconds
and the push SET KEY.
17
MOTION
> RESOLUTION
SENSITIVITY
WINDOW USE
WINDOW TONE
X-POSITION
Y-POSITION
X-SIZE
Y-SIZE
INITIAL
|
|
|
||||||||
| 1
| ||||| | |||| | 10
ON
1
11
3
39
28
SYSTEM
> DEFECT DET
DOUT FORMAT
DOUT FPS
FREQ
CVBS
APPLY
RETURN
[ 」]
1080P
30
60HZ
NTSC
[ ]
DISPLAY
> CAM TITLE
MOTION
DZOOM
INITIAL
RETURN
OFF
OFF
OFF