KT&C KPC-HDN722M - Manual (Page 16)

8. OSD MANUAL
• Function Description
0. SETUP
- EXPOSURE : Go sub menu for camera exposure control.
- WHITE ALANCE : Go sub menu for camera white balance control.
- WDR / BLC
: Go sub menu for camera WDR or BLC action.
- DNR : Control noise reduction setting.
- IMAGE : Go sub menu for adjust image functions.
- SPECIAL : Go sub menu for special feature control.
- SYSTEM : Go sub menu for system control & information.
- Reset Data All : Reset camera’s all feature data to default value.
1. EXPOSURE
- BRIGHTNESS : Adjust image brightness value.
- AE MODE : Adjust AE control mode.
- LENS(IRIS) : Select lens iris control type.
- SHUTTER : Select shutter speed control type.
• LEVEL : Adjust shutter speed at manual shutter mode.
- DSS : Adjust digital slow shutter control level.
- AGC : Adjust max gain level for brightness control.
- NIGHT ANTI-SAT : Adjust Night Anti-Sat level for Saturation Level.
- BASE FREQ
: Select basic control frequency for control camera feature.
2. WHITE BALANCE
- WB MODE : Select white balance control mode.
• AUTO
: Full auto control mode in color temperature rage 2300K~10000K.
• AUTOext
: Extended auto mode for special illumination.
• PUSH
: Enable fix the control setting for specific environment.
Push & release, for fix WB control setting.
• MANUAL
: Enable WB control setting by user’s intention.
◦
COLOR TEMP. : Select color temperature range for WB control at manual mode.
◦
R-GAIN : Adjust red color gain for WB control at maual mode.
◦
B-GAIN : Adjust blue color gain for WB control at manual mode.
- SATURATION : Adjust color saturation level.
3. WDR/BLC
- MODE : Select WDR for BLC mode.
• WDR
: Act in wdie dynamic rage mode. Controled video frame rate in 1/2.
This mode can be accessed when CVBS out setting, is "set to OFF" or
"set to AUTO(When is not connected the video cable)"
• BLC
: Act in Backlight compensation mode.
• D-WDR
: Digital wide dynamic range control.
16