KT&C KPC-HDN722M - Manual (Page 17)

17
8. OSD MANUAL
- WDR WGT : WDR weight control level settig at WDR mode.
- BLC OSD : Display BLC control zone in screen.
- BLC POS-X : Select BLC control zone vertical position.
- BLC POS-Y : Select BLC control zone horizontal position.
- BLC SIZ-X : Select BLC control zone vertical size.
- BLC SIZ-Y : Select BLC control zone horizontal size.
4. DNR
: Reduce image’s noise
5. IMAGE
- SHARPNESS : Adjust image sharpness level.
- GAMMA : Gamma Curve Select.
- FLIP : Vertical & Horizontal flip setting.
- LENS SHADING : Enable lens shading compensation.
- DZOOM
: Select digital zoom magnification.
6. SPECIAL
- PRIVACY : Setting for protect private area in image using mask setting.
• ZONE NO. : Select private mask zone number.
• ZONE OP.
: Select zone mask display on/off.
• X-POS
: Select zone horizontal position.
• Y-POS
: Select zone vertical position.
• X-SIZ
: Select zone horizontal size.
• Y-SIZ
: Select zone vertical size.
• COLOR
: Select mask color
• TRANS.
: Select mask transparency level.
- HLMASK : Mask image high light area.
• LEVEL
: Select high light level.
• COLOR
: Select mask color.
- PATTERN : Color bar display Select.
- DISPLAY INFO. : Camera information OSD on/off.
• CAMERA ID. NUM.