KT&C KPC-HDN300M - Manual (Page 12)

7. OSD MANUAL
3. BLC
- MODE:
Enable user to set BLC mode.
-> OFF, BLC
- BLC(Backlight compensation mode):
This function works for subjects in the
kind of backlight conditions.
- BLC ZONE:
Enable user to set up screen output of
chosen BLC zone.
- BLC X-POSITION:
Enable user to set up screen output of chosen BLC zone.
- BLC Y-POSITION: Enable user to set up Horizontal start position (0~20steps).
- BLC X-SIZE: Enable user to set up Vertical size (0~20steps).
- BLC Y-SIZE: Enable user to set up Horizontal size (0~20steps).
- INITIAL: Enable user to initialize the BLC setting.
4. DAY&NIGHT
Conversion of output image COLOR / BW
depending on exterior environment.
- D&N MODE
1. COLOR: Enable user to fit the output image in color.
2. B/W: Enable user to fit the output image in B/W.
3 AUTO: Enable user to convert
to COLOR/BW automatically by photocell
- DWELL TIME: In D&N MODE AUTO,
enable user to set to delay time for
changing COLOR/BW(0~10sec).
- DAY->NIGHT: Threshold of switching from Day to Night.
- NIGHT->DAY: Threshold of switching from Night to Day.
- IR OPTIMIZER: By the IR LED light, the screen is saturated, and
automatically adjust the brightness, so you can see the screen.
- IR OPT. LEVEL: Enable user to set up IR OPTIMIZER level (0~15 level)
- INITIAL: Enable user to initialize the setting in DAY&NIGHT menu.
12
BLC
> MODE
BLC ZONE
BLC X - POSITION
BLC Y - POSITION
BLC X - SIZE
BLC Y - SIZE
INITIAL
RETURN
BLC
OFF
| || | ||||||| | 6
|
|
|
||||||||
| 4
| ||||| | |||| | 7
|
|||||||
|
||
| 10
DAY&NIGHT
> MODE
DWELL TIME
DAY -> NIGHT
NIGHT -> DAY
IR OPTIMIZER
IR OPT. LEVEL
INITIAL
RETURN
AUTO
3s
| ||||| | |||| | 1
| ||||| | |||| | 2
ON
| ||||| | |||| | 7