Cleveland Motion Controls Brake EMAG 260 - Manual (Page 2)

Application Notes
•Lubricated for life (other internal lubrication not required).
The shaft should be lubricated upon assembly, to prevent seizing.
•For use with Cleveland-Kidder® 2 Amp, 24 VDC power suppy (Model EMAG-PS2)
•The standard device is designed for horizontal shaft orientation,
and a minimal speed of 60 RPM. Maximum speed is 3000 RPM
(without exceeding the max. heat dissipation capability).
•For Engineering application, please contact our technical support.
•In normal use, the outside temperature of the device can increase up to 100°C,
without damage.
f 500
Supply by 2 wires
Length = 250 mm
6 x screws CHC M8x80
at 60 ° on f 294
(user’s fixation)
f 55 H7
16 P9
59.3
10
94
f 265 g6
f 265 g6
14.5
Nominal torque 350 Nm ft.lb 260
Minimal torque 3.5 Nm ft.lb 2.6
Coil resistance - 20°C Ohms 10
Rated current DC A 1.5
Rotor inertia 89.10-3 kg.m2 lb.ft 2 206.10-2
Weight 53 kg lb 117
Heat dissipation W *
Continuously sustained with heat sink – H 900
Continuously sustained with heat sink and blower – HB 2700
Specifications
* Heat dissipation is the mechanical power (P = cw) maximum allowable.
0
50
0
100
150
200
0.8 0.2 0.4 0.6 1.0 1.2 1.4 1.6
250
300
350
400
To
rque N.m
Current A
Cleveland-Kidder
®
ELECTROMAGNETIC
PARTICLE BRAKE
EMAG 260H
EMAG 260HB
7550 Hub Parkway
Cleveland, OH 44125-5794
Tel: 216-524-8800 or (800)-321-8072
Fax: 216-642-2100
www.CMCcontrols.com
INDUSTRIAL PRODUCTS
© 2003 Cleveland Motion Controls. All Rights Reserved. Litho USA 10/03 3M EMAG260-DS
• Easy Electric Remote Control
• Low Power Consumption
• High Level of Torque Stability
• Highest Torque Density
• No Dust
• Noiseless
• Easy Installation
• Maintenance-Free Bearing
+0.2
0