Cleveland Motion Controls Classic Series Intrinsically Safe Barrier Block Kit MO-13904-2 REV AA - Manual (Page 4)

C LASSIC S ERIES I NTRINSICALLY S AFE B ARRIER B LOCK K IT AO-90360 R EV . AA
P AGE 4 OF 10
W
ARRANTY
Cleveland Motion Controls warrants the goods against defects in design, materials and workmanship for the period
of 12 months from the date of delivery on the terms detailed in the Cleveland Motion Controls, Inc. Terms and
Conditions of Sale, document number AO-90131
Cleveland Motion Controls, Inc. reserves the right to change the content and product specification without notice.
© 2005 in this document is reserved to:
Cleveland Motion Controls, Inc.
7550 Hub Parkway
Cleveland, OH 44125
216-524-8800 Phone
216-642-2199 Fax
I NTENDED U SERS
This Instruction Manual is to be made available to all persons who are required to configure, install or service the
equipment described in this manual or any other related activity.
A DDITIONAL I NFORMATION
ATTENTION: The following information is provided merely as a guide for proper installation. Cleveland Motion
Controls cannot assume responsibility for the compliance (or failure to comply) to any code (national, local or other)
that prescribes the proper installation of this electro-mechanical device or associated equipment. A hazard of
personal injury and/or property damage can exist if applicable codes are not adhered to.
CE EMC R
ESPONSIBILITY
The Intrinsically Safe Barrier Block may be used by a manufacturer as a component of a larger system, along with
other components, which may or may not bear the CE mark. The system assembler is responsible for the
compliance of the system as a whole with the EMC Directive.
Before installing the Intrinsically Safe Barrier Block you must clearly understand who is legally responsible for
conformance with the EMC Directive. Misappropriation of the CE mark is a criminal offense.
I NTRINSICALLY S AFE A PPLICATION R ESPONSIBILITY
The Cleveland-Kidder Classic Series Transducer may be used by a manufacturer as a component of a larger system,
along with other components, which may or may not be rated for Intrinsically Safe Applications. The system
assembler is responsible for the compliance of the system as a whole to any applicable Intrinsically Safe
specifications required.
The use of an approved Intrinsically Safe Barrier block with the Classic Series Transducers falls under the “Modular
Approach” or “Entity Concept” with the Classic Transducers being classified as a “Simple Device” or “Simple
apparatus” and the barrier block as the “Intrinsically Safe” or “associated apparatus”.