Cleveland Motion Controls Classic Series Intrinsically Safe Barrier Block Kit MO-13904-2 REV AA - Manual (Page 6)

C LASSIC S ERIES I NTRINSICALLY S AFE B ARRIER B LOCK K IT AO-90360 R EV . AA
P AGE 6 OF 10
2 I NSTALLATION
2.1 B EFORE I NSTALLING THE B ARRIER B LOCKS
Before installing the Barrier Blocks, perform the following steps:
1. Review the Installation manual for the amplifier or control system being used.
2. Review the Installation manual for the Cleveland-Kidder Transducers being used
3. Review the Installation manual part number INM7700 for the MTL 7700 Series Barrier Blocks.
2.1.1 I NSTALLATION P RECAUTIONS
To ensure proper installation of the barrier blocks in an intrinsically safe application, all wiring instructions, safety
considerations and warnings must be followed in the MTL INM7700 Instruction Manual.
Failure to follow the MTL INM7700 Instruction Manual can result in a system that does not meet the
intrinsically safe specifications and could result in loss of life and property. Cleveland Motions Controls
cannot be held responsible for improper installation of the Barrier Blocks.
2.1.2 S AFETY C ONSIDERATIONS
Safety practices should not be an afterthought. Before installing, servicing or calibrating review and follow
applicable policies and procedures to ensure worker safety. Machinery must be in a safe state and be aware of
any additional hazards that can arise when installing and calibrating Intrinsically Safe Systems.