Codelocks KL1000 KitLock Locker Lock - Manual

Step 9 Select the cam which suits your door and frame
and attach it to the square shaft at the end of
the spindle.
Step 10 Now check the operation of the lock using the
factory User Code 11 22.
Step 11 If the lock is functioning correctly, CHANGE
THE DEFAULT MASTER CODE 66 77 88 99 and
DEFAULT USER CODE 11 22 and program the
lock using the programming and operating
instructions enclosed.
B) New installation
Step 1 Place template on door and mark upper 6mm ( 1 /
4
”)
hole and lower 16mm ( 5 /
8
”) hole.
IMPORTANT NOTE: Before drilling fixing holes, please
ensure that the position of the KitLock when fitted will allow
enough clearance for selected cam to work.
Step 2 Drill both fixing holes.
Step 3 Continue installation from step 4 to 11, above.
II-KL1000LH-0912V2
CODELOCKS LTD UK
Tel: +44 (0) 1635 239645
Fax: +44 (0) 1635 239644
[email protected]
Helpline, service & spares
FREEPHONE 0800 393 405
CODELOCKS INC US
Tel: +1 714 979 2900
Fax: +1 714 979 2902
[email protected]
Help: 1.877.CODELOCK
www.codelocks.com WWW.KITLOCK.COM
INSTALLATION
INSTRUCTIONS
FOR LEFT HAND
HORIZONTAL
KITLOCK1000