CognitiveTPG A760 - Manual (Page 52)

Chapter 5: Paper and Supplies 52
A760 Two-Color Thermal/Impact Hybrid Printer: User Guide 189-9200303 Rev. D A760-D100 10/04
Slip side
guide
Paper holes and
low reflection
prohibited areas
Slip
edge
19 mm
(0.747”)
8 mm
(0.315”)
6 mm
(0.236”)
Slip/LED
sensor
MICR
head
Slip
sensor
Paper feed
direction
B A
The Slip/LED sensors use a reflective photo sensor.
• Do not use paper that has holes or is translucent at
the Slip/LED sensor location. (See “A” in above
illustration.)
• Do not use paper that has holes on dark areas with
low reflection (less than 60% reflection) at the slip
sensor location. (See “B” in above illustration.)
• Thin paper should be used between the top and
bottom sheets of multi-ply paper. Thick paper
reduces the copy capability.