CognitiveTPG Advantage LX - Manual (Page 15)

15
Serial Connection Parameters
• Baud Rate
• XON/XOFF
• Buffer Size
• Buffer Overflow
Connecting Via Ethernet
1. Select the Use Network Connection radio dial
2. Input the printer’s IP Address if static IP Address is to be used, otherwise, with
DHCP enabled, your server will assign an IP Address to the printer
3. Input the printer’s RTEL port number
Ethernet Connection Parameters
• IP Address
• Net Mask
• Gateway
• DHCP
• LPD
• RTEL
• RTEL Port
• Ethernet Text Buffer
Connecting Via Parallel
1. Select the Use Parallel Connection radio dial
2. Select the Parallel (LPT) Port to which the printer is connected
3. Click Connect
Printer Settings
Print Speed
The Print Speed value sets the printing speed of the printer.
• Low = 2 inches per second
• Normal = 2 inches per second
• high = 3 inches per second
hELPFUL TIP: PRINT
A SELF TEST TO
DETERMINE PRINTER’S
CURRENT SETTINGS.
A SELF TEST CAN
bE PERFORMED by
hOLDING ThE FEED
bUTTON WhILE
TURNING PRINTER
POWER ON. CONTINUE
TO hOLD ThE FEED
bUTTON UNTIL SELF
TEST PRINTS.
NOTE: USING ThE
PARALLEL PORT
CONNECTION WITh
ADMINISTRATOR
PROvIDES LIMITED
FUNCTIONALITy DUE
TO ThE PRINTER’S
UNI-DIRECTIONAL
COMMUNICATIONS ON
ThIS PORT. SETTINGS
CAN bE SENT vIA
ADMINISTRATOR, bUT
ThEy WILL NOT FILL IN
ON SCREEN.