Vga utp extender 1x4 splitter with audio – Comprehensive CVE-TRX04 User Manual
Page 2
VGA UTP Extender 1X4 Splitter with Audio
２
VGA UTP Extender 1X4 Splitter with
Audio
Dear Customer
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.
1.0 Introduction
This VGA UTP Extender 1X4 Splitter with Audio is an ideal device for local
displaying and remote viewing. It combines split function and extension function. It
distributes the input of the VGA signal and audio signal into the four identical
outputs simultaneously. Each receiver by Cat5 x1 works with the Sender as a full
functional module by receiving the distributed signal from the sender and
transmitting to displays individually. Only by the most inexpensive UTP cable with
cross stand inside, the full functional module extend the VGA display max up to
300 meters.
It offers solutions for VGA retail and show site and Projector factory, noise space
and security concerns, data center control, information distribution, conference
room presentation, school and corporate training environments.
1.1 FEATURES
This device has many features that enable it to perform in a superior manner.
Among those features you will find:
Extends VGA video and stereo audio signal max up to 300m over one UTP
cable with cross stand inside.
Adjusting GAIN and PEAK to adapt for the different length of UTP cable.
GAIN: Brightness adjustment.
PEAK: Skew adjustment.
Supports resolution max up to 1920x1200.
Dual output at local unit: 1 x VGA output for local site, plus 4 x UTP output for
remote site.
Works with monitors, projectors, HDTV, and flat panels.
2.0 SPECIFICATIONS
Input /Output Connector
o
i
d
u
A
o
e
r
e
t
S
,
)
n
i
p
5
1
e
l
a
m
e
F
(
A
G
V
r
o
t
c
e
n
n
o
c
t
u
p
n
I
Output connector
VGA(Female 15pin),
Stereo Audio,4xRJ45
Operating Frequency
Vertical Frequency Range
60/75/85Hz