Comprehensive CVE-TRX04 User Manual
Page 5
Advertising
VGA UTP Extender 1X4 Splitter with Audio
５
5.0 CONNECTION AND OPERATION
1) Connect the single VGA source to the main VGA input using a piece of VGA
cable.
2) Connect VGA output of the Sender to a local display and Audio output of the
Sender to a local Sounder
3) Connect Sender and each Receiver using a piece of each pieces of CAT-5e/6
4) Connect VGA outputs of Receivers to remote displays and Audio output of
Receivers to remote sounders.
5) Plug one 5V@ 2A power supply into the VGA UTP 1X4 Splitter and the others
5V@2A power suppliers to each Receiver individually.
Attention: Insert / Extract cable gently.
5.1 CONNECTION DIAGRAM
55 Ruta Ct. South Hackensack, NJ 07606
Toll Free: 800 526-0242
Email:
www.comprehensivecable.com
Advertising