Comprehensive CSC-7850 - Manual (Page 15)

Presentation Switcher / Scaler Buttons
12
7 Presentation Switcher / Scaler Buttons
The CSC-7850 includes the following front panel buttons:
Nine INPUT selector buttons, see section 7.1
A PIP button, see section 7.2
BLANK and FREEZE buttons
Six OSD buttons
A RESET TO XGA/720p button
A PANEL LOCK button, see section 7.3
7.1 Switching an Input
Each INPUT SELECTOR button can be used to select the source.
You can switch seamlessly
1 between each input that is connected to a source,
by pressing the appropriate INPUT SELECTOR button.
7.2 The PIP Button Feature
The Picture-in-Picture inserter (PIP) uses image insertion technology to
present video and graphic sources simultaneously 2 . You can display:
An inserted video source 3 PIP over a graphic source 4 display
An inserted graphic source 4 PIP over a video source 3 display
Three types of PIP insertions are available:
Picture-in-Picture – the PIP image appears over the background image
Picture + Picture – both the video source and the graphic source are placed side
by side and have the same height (the PIP image is stretched lengthwise)
Split – both the video source and the graphic source are placed side by side (the
PIP image appears smaller than the defined size and the source size is reduced)
1 FTB™ switching for glitchless transitions between inputs
2 Since the HDMI signal is HDCP protected, an HDMI signal cannot appear on a display that is not HDCP compliant
3 That is, composite video, s-Video or component video
4 That is, HDMI, USB or VGA