Comprehensive CSC-7850 - Manual (Page 17)

Presentation Switcher / Scaler Buttons
14
To replace a PIP in the same category (for example, changing the PIP source
from UXGA 1 to HDMI 2), press the required PIP Source on the remote control
transmitter and the PIP display will change accordingly.
You can swap the PIP source category with the main source category via the:
Remote control keys, by selecting a new main source and then a new PIP source
OSD menu, by selecting a new Input source through the Input menu and a new
PIP source through the PIP menu
When selecting one PIP source, the Presentation Switcher / Scaler automatically
recognizes and displays the selected graphic PIP source on all the video displays 1
and the selected video source on all the graphic 1 displays, compliant to Table 3.
Table 3: PIP Source Appearance Availability
The selected PIP
source:
Composite video or s-Video UXGA, HDMI, component video or USB
Appears on: UXGA, HDMI, component video or USB Composite video or s-Video
Does not appear on: Composite video or s-Video UXGA, HDMI, component video or USB
7.2.4 Toggling between the PIP and the Screen Source (Swap)
To toggle back and forth between the PIP source and the main display, as
Figure 6 illustrates, press the Swap key on the infra-red remote control
transmitter (see Figure 7).
Figure 6: OSD SWAP Status
1 Even if the input signal is not connected. In this case the PIP appears over a blank screen