Comprehensive CSW-HD880 - Manual (Page 10)

HDMI Matrix Switcher
10
If all these symbols works, it means the action is taken.
6. Operation of the Control Panel
7.1 Front Panel Description
“AV” AV synchronal button: To transfer video and audio signal synchronously by the switcher
Example: To transfer both the video and the audio signals from input channel No.3 to
output channel No.4.
Operation: Press buttons in this order “AV”,“3”,, “4””.
“INITIAL” INITIAL button: To take the restore factory EDID management.
Operation: Press this button to recover the default factory EDID data.
“EXTERNAL” EXTERNAL button: To take the manually EDID switching.
Example: To copy the EDID data of the display on output channel No.2 to the input
channel No.3.
Operation: Press buttons in this order: “EXTERNAL”, “2” in INPUT area, and then “3”
in OUTPUT area.
“1,2,3,4” I/O Keypads: Keys to select I/O channels.
Example: To transfer input channel No.3 to output channel No.1
Operation: Press buttons in this order: “3” in INPUT area, “1” in OUTPUT area.
7.2 Command Format of the Switching Operation
With the front control panel, the switcher could be control directly and rapidly by pressing the buttons
under below format.
“Menu” +“Input Channel” +“Output Channel 1”
“Menu”: “AV”, “INITIAL”, “EXTERNAL”
“Input Channel”: Fill with the number of input channel to be controlled
“Output Channel”: Fill with the number of output channels to be controlled
7.3 Examples of Operation
Example 1
：To transfer video and audio signals from input channel No.1 to output channel
No.3,4
1, Press the button for switching mode “AV” for the switching mode of video
and audio
2, Press the button for input channel number“1”
3,Press the button for the first output channel number “3”
”
4, Press the button for the second output channel number “4”
AV Audio Video
3 4 2
3 4 2
1 3 4 2