Digitac bracket and cable rear mount, 2 digitac bracket and cable rear mount, Igure – CTI Products MCN RCD System Planner User Manual
Page 21: 8 - d, Igitac, Racket and, Ibbon, Able, Digitac cib cib digitac
Section 4. System Installation Options
MCN Comparator Display System Planner
Page 17
4.1.2
DIGITAC Bracket and Cable Rear Mount
The DIGITAC rear mount bracket and cable provides a quick and easy way to mount the CIB and
connect it to the DIGITAC without extra cables and punch blocks. The CIB module I/O connector has
a pinout that matches the DIGITAC P805 connector. The rear mount includes a ribbon “T” connector.
One connector plugs into P805, another connects to the CIB module, and a third is a female 50-pin
connector for external comparator I/O connections. The DIGITAC rear mount kit is shown below:
DIGITAC
CIB
CIB
DIGITAC
P805
P806
CIB DIGITAC MTG. BRKT.
25
50
1
26
2.181
MOUNTS WITH 4 SCREWS
FEMALE CONNECTOR FOR
EXTERNAL CONNECTIONS
RIBBON CABLE
NOTE ADDITIONAL CLEARANCE
REQUIRED BEHIND DIGITAC WHEN
INSTALLING CIB AND BRACKET.
CA-80149-100
NETWORK IN
NETWORK OUT
P/S
Figure 8 - Digitac Bracket and Ribbon Cable