CTI Products MCN RCD System Planner - Manual (Page 39)

Appendix C System Examples
MCN Comparator Display System Planner Page 35
7.2 Example 2 - PC Based dial-up System for Spectra-TAC or
Ericsson Comparator-- 12 Receivers
Figure 15 shows a simple dial-up system to monitor and control 12 or 16 receivers. This system
assumes the following:
•
Spectra-TAC or Ericsson / GE Comparator, 16 (or 12) Receivers maximum,
•
Dial-Up PC Display
•
CIBs & HIB will be rack mounted
•
Wiring will be directly to the back of the comparator backplanes with no punch blocks.
COM 2
COM 1
CA-80196-100
2
COMPARATORS
HIB
CIB
CIB
T
MODEM MODEM
T
1
P/S
IN
OUT
IN
IN
OUT
REMOTE PC
Figure 15 Dial-Up Display for up to 16 Receivers
Equipment List for Example System 2
Item Part Nmber Description Qty
1 S2-60442 Comparator Interface Module (CIB) 2
2 S1-60424 Host Computer Interface Module (HIB) and
MCN Remote Comparator Display DOS Software 1
3 89-10843 Male to Blunt Cable 25’ 2
4 S2-60445 HIB - Modem 3’ Serial Cable 1
5 S2-60450 PC (9 or 25 pin) to Modem Cable 1
6 99-10962 Modem V.34 28.8 Kb Dial-up 2
7 S2-60435 Quad Rack Mount Size A (1 Rack Unit high) 1
8 S2-60438 9” Network Cable 2
9 S2-60318 Terminator (1 each) 2
10 81-10398 Power Supply N. American 1
Order the PC separately. See the System Hardware Requirements section for details.