CTI Products HIB-232 Serial Interface - Manual (Page 17)

HIB Hardware Reference HIB Modem Support
CTI Products, Inc.
68-10855-210
13
10. HIB Modem Support
When the HIB module is configured for remote mode operation (OPTION A
switch 5 is in the UP position), a modem initialization string is sent to the modem
each time the HIB is reset or power cycled. This initialization string is stored in
the HIB’s non-volatile memory. Modems that use different command sets, may
require you to change the HIB’s default initialization string.
Configuration files for various modems are shipped with the distribution disk.
These are files with a ".HIB" suffix. See the README.TXT file on the
distribution disk for any updates.
See "Programming the HIB’s Modem Initialization String Using HIBCNFG.EXE"
in Appendix B of the MCNRCD Software Manual for details about using the .HIB
files with your modem.
Please note that when you run HIBCNFG.EXE, you must have the CTIHIB.SYS
driver loaded.