CTI Products TurboVUi Solo Client Software - Manual (Page 7)

TurboVUi Solo Software Installation and Configuration Guide
7
It is recommended that the microphone being used is selected in the Recording Devices drop-down box.
For Audio Quality, select High Quality or Compressed. See the following table for a comparison of these two
modes of audio transfer.
High Quality Compressed
Bandwidth per voice stream
(one talk group)
22kBytes/sec 2.2kBytes/sec
Bandwidth for 10 voice streams
(10 talk groups)
220kBytes/sec 22kBytes/sec
Best use
Highest quality audio
between radios and TurboVUi
Clients
Most efficient use of IP
network bandwidth
Enable PC Cross Mute is useful if there are multiple computers in the same room and the user does not wish to
hear audio being played back on all of the computers. Adjacent PCs should have the same Cross Mute ID selected.
Quick Text tab
The Quick Text tab of this menu item will allow the user to define quick text messages that can be used in the Text
Messaging feature. For more info on Text Messaging, see Text Messaging in the View Menu section above. To
remove Quick Text items right click on the item and select remove.
About tab
The About tab of this menu item shows the Part Number and Version of the Client software.
GATEWAY
NOTE: This menu is available only for a user logged in as “admin”
Accounts
The Accounts tab of this menu item allows a Client logged in as “admin”
to edit current users as well as add new users to the Gateway. Click on
“Write Settings to Gateway” when finished.