Controlled Products Systems Group 1150-080 - Manual (Page 10)

1150-065-F-1-11 8
SECTION 1 - INSTALLATION
1.1 Attach Rails to Powerhead
Secure rails with 4 bolts, nuts and lock washers.
1.2 Manual Release and Chain Connection
Unlock
Pull and Turn Ring
Double Master Chain Link
Cut wire ties and route chain around gear reducer’s sprocket and through unlocked carriage assembly (To unlock assembly,
use key to unlock release ring, pull ring up and rotate 45° to release spring loaded chain catch). Connect chain together with
double master link.
IMPORTANT: The carriage assembly’s
spring loaded chain catch will only
lock into place in the double
master chain link.
1
2
CAUTION
FRAGILE POWERHEAD!
Sprocket