Controlled Products Systems Group 9210-081 - Manual (Page 11)

9210-065-F-4-12 9
Slide Gate Protection
Reverse
Loop
Automatic
Exit Loop
Minimizes the
potential of the
gate closing when
a vehicle is
present. Number
and placement of
loops is dependent
on the application.
Reverse
Loop
Minimizes the
potential of the
gate closing when
a vehicle is
present. Number
and placement of
loops is dependent
on the application.
(Optional) will
provide an open
command to the
gate operator(s)
when a vehicle
is exiting the
property.
Warning Signs
Permanently mounted
and easily visible from
either side of the gate.
Moving Gate Can Cause
Serious Injury or Death
KEEP CLEAR! Gate may move at any time
without prior warning.
Do not let children operate the gate or play
in the gate area.
This entrance is for vehicles only.
Pedestrians must use separate entrance.
Separate
Pedestrian
Walkway
Located so pedestrians
cannot come in contact
with the vehicular gate.
Non-Contact Sensors (Photo Sensors)
Contact Sensor (Reversing Edges)
1
2
A
Minimizes the potential of the gate closing on
vehicular or other traffic that loops cannot sense.
Minimizes the potential of the gate closing on
vehicular or other traffic that loops cannot sense.
Installed on the fence to help minimize the potential of
entrapment between the gate and fence. A filler post or
barrier may need to be installed between fence and gate.
B
C
Helps minimize the potential of entrapment during
the back travel of the gate.
Helps minimize the potential of entrapment during
the back travel of the gate.
Entrapment protection devices are required to reduce the risk of injury.
Install sensors where the risk of entrapment or obstruction exists while gate
is moving. Individual requirements will vary.
Fence
A
B
C
Closed Gate
Fence
Warning Signs
Permanently mounted
and easily visible from
either side of the gate.
Moving Gate Can Cause
Serious Injury or Death
KEEP CLEAR! Gate may move at any time
without prior warning.
Do not let children operate the gate or play
in the gate area.
This entrance is for vehicles only.
Pedestrians must use separate entrance.
2
1
Note: DO NOT USE MMTC, Inc. Model IR55 Photo Sensor - P/N 8080-010 for the
9200 series slide gate operator.