Controlled Products Systems Group RAM-50GB - Manual (Page 21)

RAM 50 GB
19
RAMSET
www.ramsetinc.com
 Ask your technician about all the features of our
new Ramset operator.
 Safety devices, such as reversing loops, phantom
loops, photo eyes, or miller edges must be installed
on your gate before the operator may be used. Ask
your technician which safety devices best suit your
safety needs.
 Read your warranty certificate and fill out your
warranty extension card. Return the warranty card,
via certified mail, to Ramset within 90 days of
purchase:
Ramset Automatic Gate Services, Inc.
9116 De Garmo Ave.
Sun valley, CA. 91352
 Never let children operate or play with gate controls.
Keep the controls away from children.
 The entrance is for vehicles only. Pedestrians
should use a separate entrance.
 Always keep people, children and objects away
from the gate while the gate is in operation. No one
should cross the area of a moving gate.
 Use the emergency release only when the gate is
not moving & power is turned off to the unit.
 Have the technician give you a demonstration of
how to use the emergency release.
 Keep gates properly maintained. Have a qualified
gate technician service the gate operator and gate
hardware every six months to a year. This includes
checking of safety devices, E.R.D. and battery back
up systems.
 Warning signs must be placed on every gate in a
highly visible area.
 To reset the audible alarm on the gate operator you
must turn the power of the unit off for approximately
10 seconds, then back on.
 Always keep a good relationship with your
technician and keep his or her number handy for
future maintenance or emergencies.
IMPORTANT INFORMATION FOR ThE hOMEOWNER
Ramset wishes to thank you for trusting
us to meet your gate operator needs