Controlled Products Systems Group WKP250LM - Manual (Page 2)

Operation
Enter existing Master PIN Number on Keypad:
? ? ? ?
0 9
# # #
Enter new Master PIN Number:
Change Master PIN Number
“BEEP”
“BEEP”
To use Keypad, enter any valid PIN Number.
A temporary PIN Number can be used only once
within a 24 hour period.
NOTE: The WKP5LM3 can hold up to 5 Temporary
PIN Numbers while the WKP250LM3 can hold 15.
Enter Master PIN Number on Keypad:
? ? ? ?
5 1
Enter temporary PIN Number:
Temporary PIN Numbers
“BEEP”
“BEEP”
The WKP5LM3 can support up to 5 PIN Numbers
while the WKP250LM3 can support 250.
Enter Master PIN Number on Keypad:
? ? ? ?
9
Enter new PIN Number:
Adding PIN Numbers
“BEEP”
“BEEP”
Enter Master PIN Number on Keypad:
? ? ? ?
7
Enter PIN number you want to remove:
A triple beep indicates a PIN Number has been
entered that does not exist. The Master PIN Number
cannot be deleted.
Erasing PIN Numbers
“BEEP”
“BEEP” “BEEP”
When it is dark, the panel will light when it detects
movement (up to 5') or when a button is pressed.
Enter Master PIN Number on Keypad:
? ? ? ?
0 8
1 2 3 OR OR
Enter one of the following brightness levels:
Default setting is 2.
Keypad Brightness
“BEEP”
The AA batteries (not provided) in the Keypad will
typically last up to 3 years depending on use. (Lithium
batteries recommended for colder environments.)
Battery