Controlled Products Systems Group DIALCODE - Manual (Page 35)

BACK-UP MEMORY
34
LC/VF Page
MAIN Card Updated On
05-15-01 03:50am
Press the key to Backup.
Press the key to exit the backup
process (fig e.).
NOTE: You must have an extra memory card (sold separately)
installed in the RS485 Slot (fig a.) of the Processor in order to
perform the backup process.
NOTE: Back-up Memory card must be
the same size or greater than the Main
Memory card being backed up.
The screens will display when the cards
were last updated. (fig c.) and (fig d.)
Use the keys to scroll
through the information.
SELECT PROG MODE:
(V)Volume (B)Backup
(fig b.)
(fig c.)
BACKUP Card Updated
02-11-01 04:20am
(fig d.)
(ENTER) To Backup
(EXIT) To Quit
(fig e.)
In the Program Selection Screen (fig b.),
Press the key.
Insert additional memory card in the
Backup Slot.
B
(fig a.)
Pressing the button will provide users with a help message.
IMPORTANT NOTE: While in the help screens, programming will be disabled.
To continue programming, press the button to exit the help screens first.
Back-Up Memory Card Release Button
Main Memory Card Slot
RS485 Memory Card Slot