CTX Virtual Technologies The VK200 KEYFOB Virtual Keyboard - Manual (Page 33)

32
Connecting to a PC via Bluetooth
Windows 7 and higher support Bluetooth HID and the
installation of a separate driver is not required.
Connecting via Bluetooth HID
1. Turn on VK200 KEYFOB
® by holding the power
button for 2 seconds. The blinking Bluetooth icon
on the VK200 KEYFOB
® display indicates that the
device is ready to pair.
2. Please check your PC and make sure Bluetooth is
on.
3. With Bluetooth on, click the Bluetooth icon on the
task bar. Windows will search and locate “CTX -
VK200.” Highlight ``CTX - VK200`` by clicking on
found device and press next.
4.. Successful pairing will be indicated by the solid
Bluetooth icon present on the VK200 display.
5. To turn off VK200 KEYFOB ® , Press the power
button.
6. VK200 KEYFOB
® will connect to host PC
automatically when turned back on.