CTX Virtual Technologies The VK200 KEYFOB Virtual Keyboard - Manual (Page 34)

33
NOTE
If 120 seconds has elapsed since you started the
VK200 and the VK200 is operating on battery
power and no Bluetooth connection is established
with the PC then you will need to restart the VK200,
press FN and B or go into the Menu under settings
to restart Bluetooth pairing mode.
6. ADJUSTING THE SENSITIVITY
VK200 KEYFOB ® features sensitivity adjustment for
better accuracy. There are two ways to adjust the
sensitivity:
1. Press Fn and M to go into menu mode. Next
select Settings by clicking the enter key then use the
space bar to choose Sensitivity and press enter. Next,
select the sensitivity desired. Click ESC to exit menu
mode.
2. Quick change mode allows increasing or
decreasing the sensitivity, by pressing the FN key and
the S key. To lower sensitivity, keep pressing this key
combination to cycle through all settings.